Audio
Surround Monitor Controller MC06
xx

MC06 is a two unit device:
Remote
........ 125 mm wide x 215 mm deep
(larger picture)
Main unit
.......19", 1HE
(pict 1, pict 2, pict 3)

It is made for Nuendo or other similar programs with surround mixing functionality.

It is processor controlled but still completely analog. There are also no VCA's, DCA's or similar stuf. TQ Relays are used (over 50 of them) for level control and switching.

Level can be adjusted with encoder in 1 dB steps from 0 to -63 dB of attenuation.
Level offsets can be stored for each input, stereo or surround, and Dim level can be also adjusted using only relay controlled level chain.* Additional pictures

INPUTS:
Surround A, Surround B, Stereo 1, 2, 3, Submix (DSub connectors), TB mic on front and back (XLR)
OUTPUTS:
6 ch monitors, 6 ch VU meters, Cue, Small speakers (Dsub connectors), Stereo speakers (parallel to Dsub, on XLR), Phones on back and front

*Level offset for each input is stored relatively to Input 1(SURR A). Subsequent changes of SURR A level will mantain correct level relationship to other inputs.

BUTTONS
ON buttons will turn on 6 speakers. ALL ON has priority over individual ON buttons, and ALL OFF will defeat any other setting. DIM can be set to any level, from -1 to -63 dB.
SMALL SPKR enables a second stereo pair of monitors. MONO is provided for stereo sources, but wil work on surround sources also. BACK TO FRONT sends Ls and Rs sources to L and R speakers and mute all other speakers. STORE LEVEL will store offset for selected input source and system dim level.

SUBMIX IN
will mix submix source to currently selected input. It's purpose is to simplyfy voice overdubbing also. Tipically, signal to be recorded is fed to submix input. Then, SUBMIX TO MONITORS and SUBMIX TO PHONES potentiometers will adjust it's level in monitors and talent phones. If Submix source is mono and fed to L input only, a SUBMIX MONO switch is available. See shematics for voiceover. LISTEN CUE switch sends cue signal to phones amp, replacing main mix..
There are also separateTRIMMING pots for for MAIN OUTPUTS and VU METERS.

BASS MANAGEMENT
is also available, with limited functionality. There are only BYPASS and +10dB LFE switches , while filter slope and crossover frequency is fixed (85Hz).

mc 06
mc 02
Legacy
Alpha
Nuendo
Bonsai update
Decklink
Flex
Double MS
 
 
Metro Studio
Unofficial tour
 
Personal
Short bio
Email
 
For sale
Tuchel conn.
 
Technical
Optifile
 
 
 
 
 
 
 
 
 
Page   2  >>>